A fit so perfect, no other skate will feel the same. The KONEKT HF3 Goal Skate gives you custom-like control over the shape and snugness of your boot so you can go toe to toe with the best in the game. With dynamic materials that let you fine-tune your fit and a design that keeps you fluid in the crease, the spotlight is always yours for the taking.
Find Your Flex: Get up to 22 degrees of additional flex in your stance with the HINGEFLEX cuff. Too much flex? Simply place a T-nut on the flex inhibitor mount on the heel of the boot to effectively reduce overall flex by up to 50%.
Comfortable in the Crease: A new overlap liner features an Ultralon® ankle pad for 360-degree comfort and integrated loops to secure your toe ties — allowing you to keep your focus on the game for all three periods.
Edges That Last: The pro-inspired LIGHTSPEED 5G runner features a special coating that gives you the edge retention you need to cut across the crease night after night.
- Shell: Anaform Customizable Thermoform Shell
- Liner: Overlap Liner | Ultralon® Ankle Pad | Toe Mount
- Cuff: Anaform Customizable HINGEFLEX
- Binding: KONEKT2 Push Lock Upper Buckle | Hook-and-Loop Lower Strap Closure
- Holder: VERTEXX EDGE
- Runner: LIGHTSPEED 5G
- Weight: 975g — Based on size 9 skates.
| Bauer Senior Goalie Hockey Skate Size Guide | |||||
|---|---|---|---|---|---|
| Shoe Size (US) | Size D (GSX Models) | Size E (GSX Models) | Fit 1 (Pro/Elite Models) | Fit 2 (Pro/Elite Models) | Fit 3 (Pro/Elite Models) |
| 8.5 | 7 | 7 | 7 | 7 | 7 |
| 9 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
| 9.5 | 8 | 8 | 8 | 8 | 8 |
| 10 | 8.5 | 8.5 | 8.5 | 8.5 | 8.5 |
| 10.5 | 9 | 9 | 9 | 9 | 9 |
| 11 | 9.5 | 9.5 | 9.5 | 9.5 | 9.5 |
| 11.5 | 10 | 10 | 10 | 10 | 10 |
| 12 | 10.5 | 10.5 | 10.5 | 10.5 | 10.5 |
| 12.5 | 11 | 11 | 11 | 11 | 11 |
| 13 | 11.5 | 11.5 | 11.5 | 11.5 | 11.5 |
| 13.5 | 12 | 12 | 12 | 12 | 12 |
How to Find Your Fit
Fit 1
Narrow Width
Approximate width of foot is 4 to 4.5 inches.
Low Volume
Approximate height of foot is 2 to 2.5 inches.
Fit 2
Medium Width
Approximate width of foot is 4.5 to 5 inches.
Medium Volume
Approximate height of foot is 2.5 to 3 inches.
Fit 3
Wide Width
Approximate width of foot is 5 to 5.5 inches.
High Volume
Approximate height of foot is 3 to 3.5 inches.
Things to consider
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoe sizing do not match exactly. As a general guideline, hockey skates are typically 1 - 1 ½ sizes smaller than your shoe size.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates, and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit
Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once the skates have been heat molded, the foam padding should have molded around your foot. Which will result in your skating stance pre-heat becoming the standing size (simply put, it will give your toes slightly more room in the front of the boot, and a tighter fit around your heels).
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in Inches. This measurement will correspond with the sizing charts above, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 11 inches, you would select 11.06 inches or Size 9.5)
Sizing Children for Growth Room
If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to ensure they last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based, and these measurements will not guarantee a fit that is right for you, they are merely a general guideline to follow. For the most accurate fit, we always recommend getting measured by a professional skate fitter at one of our stores***
Each Source for Hockey in the United States of America will have their own standard on returns. This is because each stores is independently owned and operated. Contact your local Source for Sports and find out how their return policy could affect your in-store purchase.
